This is a genuine Dana/Spicer drive axle flange for a Dana 60 4X4 front axles with the fulltime front end. These were used in GM, Ford, and Dodge applications with the 35 spline outer axle, which wasn’t stock for most applications. These have 55 outer splines where it goes into the hub.
Dana 60 35 Spline Axle Drive Flange Cog Gear Slug Fulltime 4X4 Front Hub GM Ford Dodge
$70.00
- SKU: 620861
- Brand: Dana/Spicer
- Weight: 2.0
- Shipping: Calculated at checkout
Weight | 2.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 60 35 Spline Axle Drive Flange Cog Gear Slug Fulltime 4X4 Front Hub GM Ford Dodge”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | K30 | 1973 - 1974 |
GM/Chevy | K30 | 1975 - 1976 |
GM/Chevy | K30 | 1977 - 1978 |
GM/Chevy | K30 | 1979 - 1980 |
Related products
This is a genuine AAM tone ring for a 10.25 or 10.5 Ford rear differential found in 1985 to current production 3/4 and 1 ton trucks.
View DetailsThis is a genuine Dana Hydra Lok or Vari Lok limited slip differential plenum. This mounts on the side of the differential underneath the bearing. It is easy to damage the original part while removing the bearing.
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 10.5 rear axle in GM trucks for 1973-2010. This snap ring measures 3 1/2″ O.D.
View DetailsMiscellaneous
GM 14 Bolt 10.5/11.5 Rear End Pinion Yoke Differential Full Float 1410 1415 Series U-Joint
This is an aftermarket Powertrain Industries pinion yoke for a 14 bolt with the 10.5″ or 11.5″ ring gear in a GM truck. This is the late style yoke with the sleeve on the seal surface. Can be used on all year trucks from 1973-current as long as you use the late pinion seal (26064030) [...]
View DetailsThis is a genuine Dana tone ring for a Dana 70 rear differential. This works on both Ford and Dodge applications
View DetailsThis is a genuine Dana wedge shaped key that drives into the nylon part of the lock nut on a Dana 70 or 80 full floating rear axle found in Dodge, Ford, and GM trucks.
View DetailsThis is a genuine AAM differential cover gasket that fits both GM and Dodge trucks with the 11.5 rear differential. We have the weight listed as 2 lbs. because it will ship in a fairly large box.
View DetailsMiscellaneous
Dana 70 80 Rear Hub Nut Nylon Lock 2″ 16 TPI 2 9/16″ Socket Full Float Dodge, Ford, GM
This is an aftermarket rear hub nut for use on Dana 70 and 80 rear axles with 2″ 16 threads per inch. This is the style that uses a wedge key that drives in a keyway on the top of the spindle and cuts through the nylon part of this nut. This nut is right [...]
View Details
Reviews
There are no reviews yet.