417-862-4455
Dana 60 4X4 Front Spindle 1977-1991 GM Chevy K30 1975-1998 Dodge Ram 2500 3500
$115.00
- SKU: 10086723
- Brand: Dana/Spicer
- Weight: 10.0
- Shipping: Calculated at checkout
6 in stock
This is a genuine Dana/Spicer 4X4 front spindle that fits 1977-1991 GM K30 1 ton trucks and 1975-1998 Dodge Ram 2500 and 3500 series trucks with the Dana 60 front axle. This is the same as part number 700013, but is much cheaper. This comes with the inner bearing, 2 dust seals, and the axle thrust washer.
| Weight | 10.0 lbs |
|---|---|
| Dimensions | 12 × 12 × 12 in |
Be the first to review “Dana 60 4X4 Front Spindle 1977-1991 GM Chevy K30 1975-1998 Dodge Ram 2500 3500”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Dodge Ram | 2500 | 1998 |
| Dodge Ram | 3500 | 1998 |
| GM/Chevy | K30 | 1975 - 1976 |
| GM/Chevy | K30 | 1977 - 1978 |
| GM/Chevy | K30 | 1979 - 1980 |
| GM/Chevy | K30 | 1981 - 1982 |
| GM/Chevy | K30 | 1983 - 1984 |
| GM/Chevy | K30 | 1985 - 1986 |
| GM/Chevy | K30 | 1987 - 1988 |
| GM/Chevy | K30 | 1989 - 1990 |
| GM/Chevy | K30 | 1991 - 1992 |
| GM/Chevy | K30 | 1993 - 1994 |
| GM/Chevy | K30 | 1995 - 1996 |
| GM/Chevy | K30 | 1997 - 1998 |
General Inquiries
There are no inquiries yet.
Related products
Miscellaneous
Dana 44 Corporate 10 Bolt 4X4 Front Axle Spindle Bolts Studs Steering Knuckle GM Ford Dodge Jeep
This is a genuine Dana/Spicer stud for the steering knuckle to the spindle.This fits Dana 44 and GM corporate 4X4 front axles. These are 3/8″-24 fine thread and the head of the stud is D shaped in order to clear the axle.
View Details
This is a 4 bolt cap that goes over the spring and bushing in a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to the early 1990’s.
View Details
This is a genuine Dana/Spicer 4X4 spindle for the Dana 60 front axle in 1978-1998 Ford F350 trucks. This is the same as 700022, but is much cheaper. This includes the inner bearing, 2 dust seals, and axle thrust washer.
View Details
Axles & Axle Bearings
DANA 60 FRONT 35 SPLINE CHROMOLY DRIVE FLANGES 4X4 Front Axle Chevy Ford Dodge
This is a genuine Dana/Spicer drive flange kit for a Dana 60 4X4 front axle with 35 spline outer axles. Most factory outer axles were 30 spline. These fit GM, Ford, and Dodge applications with 55 internal splines in the hubs.
View Details
This is an aftermarket spindle that fits Ford F150 and Bronco 4X4 front applications from 1980-1992. This is for the Dana 44 front axle. Dana has discontinued this part number.
View Details
This is a genuine Dana/Spicer 4X4 front spindle that fit’s the following Ford applications: DANA 44 SPINDLE WITH 5 HOLES. FITS MOST FORD 1977 1/2-1979 F250 . DOES NOT FIT 76-77 LARGE EXTERNAL HUB. BEARING JOURNALS – 2.5″ OUTER & 1.625″ INNER. FLANGE DIA- 6.12″ INNER BRG DIA 2.0” // LENGTH 6.25”
View Details
This is the upper nylon bushing in a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to mid 1990’s.
View Details
This is a genuine Dana/Spicer 4X4 front spindle for the Dana 60 front axle found in 1980’s and early 1990’s GM and Dodge trucks. This kit includes inner spindle bearing, thrust washer, and the 2 rubber seals for the backside of the spindle. Photo shows spindle bearing installed, but they usually aren’t.
View Details
Reviews
There are no reviews yet.