This is the upper screw in pin a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to the early 1990’s.
Dana 60 King Pin 4 Bolt Upper Pin Screw In GM Chevy Ford Dodge 4X4 Front Axle
$13.75
- SKU: 37302
- Brand: Dana/Spicer
- Weight: 2.0
- Shipping: Calculated at checkout
Weight | 2.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 60 King Pin 4 Bolt Upper Pin Screw In GM Chevy Ford Dodge 4X4 Front Axle”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | W350 | 1973 - 1974 |
Dodge Ram | W350 | 1975 - 1976 |
Dodge Ram | W350 | 1977 - 1978 |
Dodge Ram | W350 | 1979 - 1980 |
Dodge Ram | W350 | 1981 - 1982 |
Dodge Ram | W350 | 1983 - 1984 |
Dodge Ram | W350 | 1985 - 1986 |
Dodge Ram | W350 | 1987 - 1988 |
Dodge Ram | W350 | 1989 - 1990 |
Dodge Ram | W350 | 1991 - 1992 |
Dodge Ram | W350 | 1993 |
GM/Chevy | K30 | 1973 - 1974 |
GM/Chevy | K30 | 1975 - 1976 |
GM/Chevy | K30 | 1977 - 1978 |
GM/Chevy | K30 | 1979 - 1980 |
GM/Chevy | K30 | 1981 - 1982 |
GM/Chevy | K30 | 1983 - 1984 |
GM/Chevy | K30 | 1985 - 1986 |
GM/Chevy | K30 | 1987 - 1988 |
GM/Chevy | K30 | 1989 - 1990 |
GM/Chevy | K30 | 1991 |
Related products
Spindles
1977-1991 GM Chevy Dana 44 4X4 Axle Front Spindle Corporate 10 Bolt Blazer Suburban K10 K20
This is a genuine Dana Spicer spindle for the Dana 44 or corporate 10 bolt 4X4 front axle in 1/2 and 3/4 ton trucks, Blazers, and Suburbans from 1977-1991. This also comes with the dust seals, inner bearing, and plastic thrust washer.
View DetailsThis is a genuine Dana/Spicer 4X4 front spindle that fits some 1993-1996 Ford F150 and Bronco’s from 1993-1996 w/o ABS. If you are not sure which part number that you need, please email us with your differential tag number and we can tell for sure.
View DetailsThis is a genuine Dana/Spicer 4X4 front spindle that fits 1977-1991 GM K30 1 ton trucks and 1975-1998 Dodge Ram 2500 and 3500 series trucks with the Dana 60 front axle. This is the same as part number 700013, but is much cheaper. This comes with the inner bearing, 2 dust seals, and the axle [...]
View DetailsThis is a genuine Dana/Spicer 4X4 spindle for the Dana 60 front axle in 1978-1998 Ford F350 trucks. This is the same as 700022, but is much cheaper. This includes the inner bearing, 2 dust seals, and axle thrust washer.
View DetailsAxles & Axle Bearings
GM Ford Dodge Jeep Dana 44 4X4 Front Axle Cog Gear Slug 19 Spline Full Time Drive Flange
This is a genuine Dana/Spice cog or slug use to replace the lockout hubs on trucks with full time four wheel drive. This is 1.271″ 19 splines on the inside and 2.925″ 48 spline on the outside. These were used in many popular 1/2 and 3/4 ton applications.
View DetailsThis is the upper nylon bushing in a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to mid 1990’s.
View DetailsThis is a genuine Dana/Spicer spindle nut kit for most Dana 44 4X4 front axles in domestic trucks. This kit includes 1 inner nut with pin (21588X), 1 outer nut w/o pin (31139) and 1 washer with locking tab and holes (36569). This kit is for one side, so 2 kits are required per truck. [...]
View DetailsThis is a lower king pin bearing and seal kit for a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to the mid 1990’s. This kit does one side. 2 kits required per truck.
View Details
Reviews
There are no reviews yet.