417-862-4455No products in the cart.
Dana 60 70 Pinion Yoke 1350 Series Universal Joint GM Chevy Ford Dodge U-joint 29 Spline
$55.00
- SKU: 3-4-5731-1X
- Brand: Dana/Spicer
- Weight: 2.4
- Shipping: Calculated at checkout
| Brand | Spicer |
| Series | 1350 |
| Spline Count | 29 |
| Yoke Style | BS |
| Hub Diameter R | 1.875 |
| C/L To End Hub S | 3.000 |
| Involute Spline | I |
| Length Thru Hole Q | 1.500 |
| VMRS | 024001003 |
| Joint Angle #1 | 22.5 |
| O.D. of Spline | 1.276 |
| Package Type | EACH |
| Package Qty | 1 |
| Weight | 2.25 LB |
| Country of Origin |
United States |
This fits most common Dana 60 and 70 applications, including GM, Ford, and Dodge. This also replaces part number 3-4-14531-1 used in many late model Ford F250, F350, and F450 4X4 front applications.
| Weight | 2.4 lbs |
|---|---|
| Dimensions | 4 × 4 × 4 in |
Related products
$95.00
This is a genuine AAM pinion yoke that fits all GM 7.5/7.6/8.0 rear differentials. These were found in S10’s, Camaro’s, and Trailblazers. This is the later style yoke with the wear sleeve made on it, so you will have to use the 1998+ pinion seal. This is for the 1344 or 3R series u-joint with [...]
View Details
$80.00
This is a genuine AAM pinion yoke that shows to fit GM trucks with either the 10.5 or 11.5 rear differential in a 1480/1485 series. These show to be used in 2010 and newer trucks, but can also be used for earlier applications when upgrading to the larger universal joints. This is also with a [...]
View Details
Transfer Case Parts
DODGE RAM TRUCK 3500 2500 40038571 1480/1485 2003+ Slip Yoke Transfer Case 271
$80.00
This is a genuine AAM slip yoke that fits the 271 or 273 transfer case found in 2003-2011 Dodge Ram 2500 and 3500 series trucks. Technical specifications, 2.299″ Ground Hub (barrel diameter), 1.74803 spline diameter 34 spline, 9.550″ C/l to end. This slip uses the AAM u-joint number 74081485. Please check the u-joint size in [...]
View Details
$60.00
This is a genuine AAM front differential flanged yoke that fits 2014 and newer Dodge 3/4 and 1 ton trucks with the 9.25 AAM 4X4 front axle assembly. This fits the front differential with the 12 bolt cover.
View Details
Out of stock
$69.00
This is a genuine Dana pinion yoke for a 1410 series u-joint that fits Dana 80 rear differentials. This will fit GM, Ford, and Dodge applications. This yoke is the same as the more expensive 3-4-11081-1X. It just has a little different dust shield on it. This one actually has more seal clearance.
View Details
Yokes
GM 8.6 Pinion Yoke 8.6 10 Bolt Rear Differential 1999+ 3R Series U-Joint Inside Snap Rings Chevy
$85.00
This is a genuine AAM pinion yoke that fits the GM 10 bolt rear differential with the 8.6″ ring gear found in Chevy trucks from 1999+. This is for the 3R series u-joint with inside snap rings. This is the late style yoke with the factory wear sleeve on it. This can be used in [...]
View Details
Out of stock
$89.01
This is a genuine AAM pinion yoke with the balancer for the GM 3/4 and 1 ton trucks with the 11.5 rear differential 1999 and newer. This is for the 1480 or 1485 series u-joint. Can also be used on the 14 bolt 10.5 rear differentials.
View Details
$65.00
This is a genuine AAM driveshaft flange yoke that fits the rear driveline where it bolts to the rear pinion flange. This is for the 1555 series universal joint. This mates with the 40062272 4 bolt pinion flange.
View Details