417-862-4455
Dana 60 Pinion Crush Sleeve Dodge Ram Ford 1999-2015 Super 60
$3.25
- SKU: 45658
- Brand: Dana/Spicer
- Weight: .20
- Shipping: Calculated at checkout
3 in stock
This is a genuine Dana/Spicer crush sleeve for a Dana 60. Please note that the original Dana 60 used preload shims instead of a crush sleeve. This is compatible with all 1994-2002 Dodge and 1999-2015 Ford, front and rear applications that use a crush sleeve.
| Weight | .20 lbs |
|---|---|
| Dimensions | 1 × 1 × 1 in |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View Details
Small Parts & Seals
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View Details
Small Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View Details
This is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View Details
Small Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View Details
Small Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View Details
Small Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View Details
Small Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 to 2014 GM trucks and SUV’s with 8.6 rear end with the 10 bolt cover. This is for the yoke with the factory wear sleeve on it.
View Details