This is an aftermarket 3rd gear on the mainshaft for a Dodge diesel truck with the G56 6 speed manual transmission. These were used in Dodge tucks from 2005-2017. This gear has 30 teeth.
Dodge G56 Diesel 6 Speed Manual Transmission Mainshaft 3rd Gear 2005+ Ram 2500 3500
$92.85
- SKU: G56-11
- Brand: Pro Active
- Weight: 4.0
- Shipping: Calculated at checkout
Weight | 4.0 lbs |
---|---|
Dimensions | 6 × 6 × 2 in |
Related products
Transmission Parts
This syncro ring kit fits early (1987-1994) Ford ZF 5 speeds also known as S5-42. This set has 6 rings total.
View DetailsTransmission Parts
Reverse Synchronizer assembly NV5600 Dodge diesel 6 speed transmission
This is a reverse synchronizer assembly for the NV5600 Dodge diesel 6 speed transmission. These are now aftermarket replacements and do not include the spiral wound snap ring. The Dodge part number was 05012125AA.
View DetailsThis bearing and seal kit fits all G56 Dodge diesel 6 speed manual transmissions. It includes all the tapered bearings and races and seals. It does not include any caged needle bearings for underneath the gears on the mainshaft.
View DetailsTransmission Parts
Cast Iron Tailhousing Transfer Case Adapter Dodge diesel NV4500 5 Speed Transmission
This is a cast iron tailhousing that fits a NV4500 5 speed transmission in the Dodge diesel trucks. This is much heavier that the factory aluminum piece and is a direct bolt on replacement. These have the 2 threaded holes on the side for the transfer case shifter, so they will fit all years.
View DetailsThis front bearing retainer fits NV4500 Dodge diesel with the aftermarket big 1 3/8″ input shafts. Still uses stock throwout bearing.
View DetailsTransmission Parts
Inner Synchronizer ring NV5600 Dodge diesel 6 speed transmission updated
This synchronizer ring fits all the later (2002 & up) NV5600 transmission found in the Dodge diesel trucks. 22760 is our part number, but some suppliers use a part number 44548. There are 7 of these in 1 transmission and they are all the same.
View DetailsTransmission Parts
1 3/8″ input shaft Dodge diesel and V10 NV4500 transmission 5 speed
This input shaft fits the NV4500 Dodge transmissions used behind the diesel or V10 gas engines. This is the larger 1 3/8″ clutch spline found on some aftermarket or factory 6 speed clutches.
View DetailsTransmission Parts
This input shaft fits all Dodge NV5600 6 speed transmissions with the 1 3/8″ clutch spline. It is made for use with the updated synchronizer rings.
View Details