This is a genuine AAM pinion companion flange yoke that shows to fit Ford trucks and SUV’s with the 9.75 rear end. This is the part that the driveline bolts to with 4 bolts. This yoke is double drilled, but both bolt patterns are the same 4.250″ bolt circle. The seal diameter is 1.812″. It is 31 spline with a spline diameter of 1.343″. It is 2.00″ tall and has a 2.00″ pilot to center up the driveshaft flange. This also fits 2015 and newer Ford F150 with the Super 8.8.
Ford 9.75 Pinion Yoke Round Companion Flange F150 Expedition 4 Bolt Super 8.8 2015+
$65.00
- SKU: YC3Z4851AB
- Brand: AAM American Axle Manufacturing
- Weight: 4.0
- Shipping: Calculated at checkout
Weight | 4.0 lbs |
---|---|
Dimensions | 6 × 6 × 4 in |
Be the first to review “Ford 9.75 Pinion Yoke Round Companion Flange F150 Expedition 4 Bolt Super 8.8 2015+” Cancel reply
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | Expedition | 1997 - 1998 |
Ford | Expedition | 1999 - 2000 |
Ford | Expedition | 2001 - 2002 |
Ford | Expedition | 2003 - 2004 |
Ford | Expedition | 2005 - 2006 |
Ford | Expedition | 2007 - 2008 |
Ford | Expedition | 2009 - 2010 |
Ford | F150 | 1997 - 1998 |
Ford | F150 | 1999 - 2000 |
Ford | F150 | 2001 - 2002 |
Ford | F150 | 2003 - 2004 |
Ford | F150 | 2005 - 2006 |
Ford | F150 | 2007 - 2008 |
Ford | F150 | 2009 - 2010 |
Related products
Yokes
Dodge Ram 2003+ 1555 Drive Shaft Flange Yoke 4 Bolt 10.5 11.5 Rear Driveline U-Joint Universal
This is a genuine AAM driveshaft flange yoke that fits the rear driveline where it bolts to the rear pinion flange. This is for the 1555 series universal joint. This mates with the 40062272 4 bolt pinion flange.
View DetailsThis is a genuine AAM pinion yoke that shows to fit GM trucks with either the 10.5 or 11.5 rear differential in a 1480/1485 series. These show to be used in 2010 and newer trucks, but can also be used for earlier applications when upgrading to the larger universal joints. This is also with a [...]
View DetailsThis is a genuine AAM driveshaft slip yoke for a 1555 series driveline in a 2006 and newer Dodge Ram 2500 or 3500 series truck. It measures 9.52756″ long (from center of u-joint) 2.29961″ O.D. (where it slips into the transfer case) and 1.74803″ 34 spline. This yoke has been discontinued from AAM and 40098344 [...]
View DetailsThis is a genuine Dana pinion yoke for a 1410 series u-joint that fits Dana 80 rear differentials. This will fit GM, Ford, and Dodge applications. This yoke is the same as the more expensive 3-4-11081-1X. It just has a little different dust shield on it. This one actually has more seal clearance.
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsThis is a genuine Dana pinion yoke flange for a Dana 80 in a Ford truck. The Ford part number was BC3Z4851B. If you aren’t sure of your part number feel free to contact us with your differential tag number and we can check for you.
View DetailsThis is a genuine AAM pinion yoke that fits all GM 7.5/7.6/8.0 rear differentials. These were found in S10’s, Camaro’s, and Trailblazers. This is the later style yoke with the wear sleeve made on it, so you will have to use the 1998+ pinion seal. This is for the 1344 or 3R series u-joint with [...]
View DetailsThis is a genuine AAM rear pinion yoke for use on the early 1997 and older GM 8.5 10 bolt. This is for the Saginaw 3R series u-joint with the inside snap ring and no tabs on the yoke. This is for use with a National 2043 pinion seal and can be used on 1998 [...]
View Details
Reviews
There are no reviews yet.