This is an aftermarket shift boot for the ZF 5 speed transmission found in many 1987-1993 Ford trucks.
Ford F250 F250 ZF 5 Speed Transmission Shifter Boot 1987-1993 S542
$15.00
- SKU: 1307306236
- Brand: ZF
- Weight: .30
- Shipping: Calculated at checkout
Weight | .30 lbs |
---|---|
Dimensions | 2 × 2 × 2 in |
Related products
Transmission Parts
This first gear fits all NV5600 Dodge diesel 6 speed transmissions. If you have an early (2001 & older) transmission you will have to use the updated lined synchronizer ring. There is a Dodge part number on the box for reference 05019907AA. This is an aftermarket part. We have used the same supplier for over [...]
View DetailsTransmission Parts
Outer synchronizer ring NV5600 Dodge diesel 6 speed transmission
This outer synchronizer ring fits all NV5600 Dodge diesel 6 speed transmissions. There are 7 of theses in 1 transmission and they are all the same.
View DetailsTransmission Parts
This input shaft fits all Dodge NV5600 6 speed transmissions with the 1 3/8″ clutch spline. It is made for use with the updated synchronizer rings.
View DetailsTransmission Parts
This mainshaft fits all NV5600 2wd Dodge diesel 6 speed transmission. The box has a Dodge part number 05010049AA for reference. This is an aftermarket part. We have been using the same supplier on these for over 5 years without an issue.
View DetailsTransmission Parts
This syncro ring kit fits Ford ZF 5 speeds 1996 and later S5-47. This set has 6 rings.
View DetailsTransmission Parts
NV4500 cluster assembly early up to 1996 Dodge and GM 5:61 ratio
This cluster fits 1992-1996 Dodge and most GM NV4500 transmissions with the 22 tooth input shaft and 5:61 ratio.
View DetailsTransmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View DetailsTransmission Parts
Input shaft G56 Dodge diesel 6 speed manual transmission 6.7
This input shaft fits G56 transmissions in Dodge diesel applications with the 6.7 engine. It has 3 I.D. grooves on the shaft and 28 teeth on the gear.
View Details