This front bearing retainer fits NV4500 Dodge diesel with the aftermarket big 1 3/8″ input shafts. Still uses stock throwout bearing.
Front bearing retainer NV4500 Dodge diesel with big input shaft 1 3/8″ spline
$32.50
- SKU: 18161D
- Brand: Pro Active
- Weight: 4.0
- Shipping: Calculated at checkout
6 in stock
Weight | 4.0 lbs |
---|---|
Dimensions | 6 × 6 × 6 in |
Be the first to review “Front bearing retainer NV4500 Dodge diesel with big input shaft 1 3/8″ spline”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 - 2001 |
Dodge Ram | 2500 | 2002 - 2003 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 - 2001 |
Dodge Ram | 3500 | 2002 - 2003 |
Related products
Transmission Parts
Outer synchronizer ring NV5600 Dodge diesel 6 speed transmission
This outer synchronizer ring fits all NV5600 Dodge diesel 6 speed transmissions. There are 7 of theses in 1 transmission and they are all the same.
View DetailsTransmission Parts
This mainshaft fits all NV5600 2wd Dodge diesel 6 speed transmission. The box has a Dodge part number 05010049AA for reference. This is an aftermarket part. We have been using the same supplier on these for over 5 years without an issue.
View DetailsTransmission Parts
This input shaft fits the G56 Dodge 6 speed manual transmission found behind the 5.9 Cummins diesel engine. It has 2 I.D. grooves on the shaft and 27 teeth on the gear.
View DetailsTransmission Parts
1 3/8″ input shaft Dodge diesel and V10 NV4500 transmission 5 speed
This input shaft fits the NV4500 Dodge transmissions used behind the diesel or V10 gas engines. This is the larger 1 3/8″ clutch spline found on some aftermarket or factory 6 speed clutches.
View DetailsTransmission Parts
This input shaft fits all ZF Ford 6 speeds with the 7.3 diesel engine.
View DetailsTransmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View DetailsThis bearing and seal kit fits all NV5600 dodge transmissions and includes all the tapered bearing and races and seals. It does not include any of the caged needle bearings. They are available in a seperate needle bearing kit.
View DetailsTransmission Parts
This 4X4 mainshaft fits all NV5600 Dodge diesel 6 speed transmissions. It also has a Dodge part number on the box for reference 05010050AA. This is an aftermarket part and we have used the same supplier for more than 5 years without any issues.
View Details
Reviews
There are no reviews yet.