417-862-4455
G56 Dodge Ram 2500 3500 6 Speed Transmission Mainshaft 4th Gear 5.9 6.7 Diesel
$120.00
- SKU: G56-4
- Brand: Pro Active
- Weight: 3.0
- Shipping: Calculated at checkout
2 in stock
This is an aftermarket 4th gear on the mainshaft for a G56 transmission found in 2005 and newer Dodge Ram trucks with a Cummins diesel engine. his one fits trucks with either the 5.9 or 6.7 engine and has 28 teeth. The Pro-Active part number is G56-19, but we use G56-4. The original Dodge part number is 05142841AA.
| Weight | 3.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
Transmission Parts
Stock replacement front bearing retainer Dodge diesel and V10 NV4500 transmission
This is a stock replacement front bearing retainer for the NV4500 transmissions found in the Dodge diesel or V10 gas trucks. Fits all years with stock inputs.
View Details
Transmission Parts
Inner Synchronizer ring NV5600 Dodge diesel 6 speed transmission updated
This synchronizer ring fits all the later (2002 & up) NV5600 transmission found in the Dodge diesel trucks. 22760 is our part number, but some suppliers use a part number 44548. There are 7 of these in 1 transmission and they are all the same.
View Details
Transmission Parts
1 3/8″ input shaft Dodge diesel and V10 NV4500 transmission 5 speed
This input shaft fits the NV4500 Dodge transmissions used behind the diesel or V10 gas engines. This is the larger 1 3/8″ clutch spline found on some aftermarket or factory 6 speed clutches.
View Details
Transmission Parts
This 4X4 mainshaft fits all NV5600 Dodge diesel 6 speed transmissions. It also has a Dodge part number on the box for reference 05010050AA. This is an aftermarket part and we have used the same supplier for more than 5 years without any issues.
View Details
Transmission Parts
This input shaft fits all ZF Ford 6 speeds with the 7.3 diesel engine.
View Details
Transmission Parts
Input shaft T56 Camaro/Firebird LS1 6 speed Tremec transmission
This input shaft fits all T56 Camaro and Firebird applications with the LS1 engine from 1998-2002. It has 31 teeth and is 10.62 inches long. This is an aftermarket shaft from Pro-Active gear. We have used a lot of their parts and have had really good results.
View Details
This front bearing retainer fits NV4500 Dodge diesel with the aftermarket big 1 3/8″ input shafts. Still uses stock throwout bearing.
View Details
This bearing and seal kit fits all NV5600 dodge transmissions and includes all the tapered bearing and races and seals. It does not include any of the caged needle bearings. They are available in a seperate needle bearing kit.
View Details