This mainshaft 5th gear fits all Dodge diesel and V10 NV4500 transmissions. There is a Dodge part number on the box for reference 4741551. This is an aftermarket part from a supplier that we have used for years.
Mainshaft 5th Gear NV4500 Dodge Diesel 5 Speed Transmission
$39.91
- SKU: 18164
- Brand: Pro Active
- Weight: 2.0
- Shipping: Calculated at checkout
| Weight | 2.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “Mainshaft 5th Gear NV4500 Dodge Diesel 5 Speed Transmission”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Dodge Ram | 2500 | 1994 - 1995 |
| Dodge Ram | 2500 | 1996 - 1997 |
| Dodge Ram | 2500 | 1998 - 1999 |
| Dodge Ram | 2500 | 2000 - 2001 |
| Dodge Ram | 2500 | 2002 - 2003 |
| Dodge Ram | 3500 | 1994 - 1995 |
| Dodge Ram | 3500 | 1996 - 1997 |
| Dodge Ram | 3500 | 1998 - 1999 |
| Dodge Ram | 3500 | 2000 - 2001 |
| Dodge Ram | 3500 | 2002 - 2003 |
General Inquiries
There are no inquiries yet.
Related products
Transmission Parts
NV4500 cluster assembly early up to 1996 Dodge and GM 5:61 ratio
This cluster fits 1992-1996 Dodge and most GM NV4500 transmissions with the 22 tooth input shaft and 5:61 ratio.
View DetailsTransmission Parts
This input shaft fits all ZF Ford 6 speeds with the 7.3 diesel engine.
View DetailsTransmission Parts
Cast Iron Tailhousing Transfer Case Adapter Dodge Diesel NV4500 5 Speed Transmission 1994-2003 4X4
This is a cast iron tailhousing that fits a NV4500 5 speed transmission in the Dodge diesel trucks. This is much heavier that the factory aluminum piece and is a direct bolt on replacement. These have the 2 threaded holes on the side for the transfer case shifter, so they will fit all years.
View DetailsTransmission Parts
Reverse Gear NV5600 Dodge Diesel 6 Speed Transmission Updated
Th reverse gear fits all NV5600 Dodge diesel 6 speed transmissions. If you have an early transmission 2001 and earlier transmission you will have to update the lined synchronizer ring. There is a Dodge part number for reference 05019887AA. This is an aftermarket part, but we have used this same supplier for over 5 years [...]
View DetailsTransmission Parts
This input shaft fits all Dodge NV5600 6 speed transmissions with the 1 3/8″ clutch spline. It is made for use with the updated synchronizer rings.
View DetailsThis bearing and seal kit fits all G56 Dodge diesel 6 speed manual transmissions. It includes all the tapered bearings and races and seals. It does not include any caged needle bearings for underneath the gears on the mainshaft.
View DetailsTransmission Parts
Outer synchronizer ring NV5600 Dodge diesel 6 speed transmission
This outer synchronizer ring fits all NV5600 Dodge diesel 6 speed transmissions. There are 7 of theses in 1 transmission and they are all the same.
View DetailsTransmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View Details
417-862-4455


Reviews
There are no reviews yet.