417-862-4455
Master Shim Kit For Dana 80 Pinion Differential Carrier Ford Chevy Dodge 4.125″
$45.00
- SKU: 707068X
- Brand: Dana/Spicer
- Weight: 1.0
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer master shim kit for the Dana 80 rear differential found in Ford, GM, and Dodge trucks. This kit includes an assortment of shims for pinion preload, pinion depth, and differential inboard shims (used to adjust backlash and bearing preload), as well as a pinion nut and washer. This kit is for Dana 80’s with the 4.125″ inner pinion bearing race, which is all Dodge and GM applications as well as 1997 and older Ford’s.
| Weight | 1.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View Details
Small Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View Details
Small Parts & Seals
GM 9.5 Rear Pinion Yoke Seal 1998+ AAM 3/4 ton Truck Dodge 4X4 Front 2500 3500 9.25 Front 2003+
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 9.5 rear end. This is for the yoke with the factory wear sleeve on it. This also fits Dodge 3/4 and 1 ton 4X4 trucks 2003 and newer with the AAM 9.25 front axle. These [...]
View Details
This is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View Details
Small Parts & Seals
These axle tube seals fit 2003+ Dodge Ram 2500/3500 series 4X4 front ends with the 9.25 front axle. This is an AAM part. These are sold individually. The newest AAM part number for this seal is 40201742.
View Details
Small Parts & Seals
This is a genuine rear wheel hub seal for 2011 and newer GM 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single or dual rear wheels. This part number is actually on the seal itself.
View Details
Small Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View Details
Small Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View Details