417-862-4455
NV4500 Countershaft 5th Gear Thrust Washer GM Dodge 5 Speed
$15.95
- SKU: 16874
- Brand: New Venture
- Weight: .30
- Shipping: Calculated at checkout
2 in stock
This is an aftermarket thrust washer for the 5th gear on the countershaft in a NV4500 5 speed transmission.
| Weight | .30 lbs |
|---|---|
| Dimensions | 2 × 2 × 1 in |
General Inquiries
There are no inquiries yet.
Related products
Transmission Parts
Syncro Synchronizer Ring Kit ZF 6 Speed Ford 7.3 and 6.0 & GM ZF750 ZF650 Transmission
This is an aftermarket syncro kit fits all ZF 6 speed transmissions in Ford and GM trucks. This kit has 7 rings. It does not include the inner or outer rings for 1st and 2nd.
View Details
Transmission Parts
Inner Synchronizer ring NV5600 Dodge diesel 6 speed transmission updated
This synchronizer ring fits all the later (2002 & up) NV5600 transmission found in the Dodge diesel trucks. 22760 is our part number, but some suppliers use a part number 44548. There are 7 of these in 1 transmission and they are all the same.
View Details
Transmission Parts
This mainshaft fits all NV5600 2wd Dodge diesel 6 speed transmission. The box has a Dodge part number 05010049AA for reference. This is an aftermarket part. We have been using the same supplier on these for over 5 years without an issue.
View Details
Transmission Parts
Input shaft T56 Camaro/Firebird LS1 6 speed Tremec transmission
This input shaft fits all T56 Camaro and Firebird applications with the LS1 engine from 1998-2002. It has 31 teeth and is 10.62 inches long. This is an aftermarket shaft from Pro-Active gear. We have used a lot of their parts and have had really good results.
View Details
Transmission Parts
Stock replacement input shaft Dodge diesel and V10 NV4500 transmission
This input shaft fits all Dodge diesel or V10 NV4500 5 speed transmissions. It is 1 1/4″ spline diameter and 22 teeth. This replaces part number 18160 and Dodge part number 4882358.
View Details
This bearing and seal kit fits all Dodge NV4500 transmissions and GM NV4500 transmissions with the external slave cylinder up to 1995. This kit has all the seals, tapered bearings and races as well as the mainshaft pilot and thrust bearing and countershaft front plug. This kit does not include the caged needle bearings underneath [...]
View Details
Transmission Parts
Cast Iron Tailhousing Transfer Case Adapter Dodge Diesel NV4500 5 Speed Transmission 1994-2003 4X4
This is a cast iron tailhousing that fits a NV4500 5 speed transmission in the Dodge diesel trucks. This is much heavier that the factory aluminum piece and is a direct bolt on replacement. These have the 2 threaded holes on the side for the transfer case shifter, so they will fit all years.
View Details
Transmission Parts
This input shaft fits all ZF Ford 6 speeds with the 7.3 diesel engine.
View Details