This is an aftermarket 4X4 mainshaft for the ZF 5 speed transmission found in many F250 and F350 trucks with a 460 gas engine, or a 6.9 or 7.3 diesel engine. This shaft is 18 3/4″ long and 31 spline where the transfer case slides on.
S542/S547 Ford ZF 5 Speed Transmission 4X4 Mainshaft 7.5 460 Gas 6.9 7.3 Diesel
$195.00
- SKU: 1307304352
- Brand: Motive Gear
- Weight: 18.0
- Shipping: Calculated at checkout
1 in stock
Weight | 18.0 lbs |
---|---|
Dimensions | 20 × 4 × 4 in |
Related products
Transmission Parts
This mainshaft fits all NV5600 2wd Dodge diesel 6 speed transmission. The box has a Dodge part number 05010049AA for reference. This is an aftermarket part. We have been using the same supplier on these for over 5 years without an issue.
View DetailsTransmission Parts
Stock replacement input shaft Dodge diesel and V10 NV4500 transmission
This input shaft fits all Dodge diesel or V10 NV4500 5 speed transmissions. It is 1 1/4″ spline diameter and 22 teeth. This replaces part number 18160 and Dodge part number 4882358.
View DetailsTransmission Parts
1 3/8″ input shaft Dodge diesel and V10 NV4500 transmission 5 speed
This input shaft fits the NV4500 Dodge transmissions used behind the diesel or V10 gas engines. This is the larger 1 3/8″ clutch spline found on some aftermarket or factory 6 speed clutches.
View DetailsTransmission Parts
NV4500 cluster assembly early up to 1996 Dodge and GM 5:61 ratio
This cluster fits 1992-1996 Dodge and most GM NV4500 transmissions with the 22 tooth input shaft and 5:61 ratio.
View DetailsTransmission Parts
Input shaft T56 Camaro/Firebird LS1 6 speed Tremec transmission
This input shaft fits all T56 Camaro and Firebird applications with the LS1 engine from 1998-2002. It has 31 teeth and is 10.62 inches long. This is an aftermarket shaft from Pro-Active gear. We have used a lot of their parts and have had really good results.
View DetailsTransmission Parts
Syncro Synchronizer Ring Kit ZF 6 Speed Ford 7.3 and 6.0 & GM ZF750 ZF650 Transmission
This syncro kit fits all ZF 6 speed transmissions in Ford and GM trucks. This kit has 11 rings.
View DetailsTransmission Parts
Cast Iron Tailhousing Transfer Case Adapter Dodge diesel NV4500 5 Speed Transmission
This is a cast iron tailhousing that fits a NV4500 5 speed transmission in the Dodge diesel trucks. This is much heavier that the factory aluminum piece and is a direct bolt on replacement. These have the 2 threaded holes on the side for the transfer case shifter, so they will fit all years.
View DetailsTransmission Parts
This input shaft fits the G56 Dodge 6 speed manual transmission found behind the 5.9 Cummins diesel engine. It has 2 I.D. grooves on the shaft and 27 teeth on the gear.
View Details