417-862-4455
Updated 5th Gear Nut Kit NV4500 GM/Chevy 4X4 5 Speed Transmission
$12.50
- SKU: 27134M
- Brand: New Venture
- Weight: .50
- Shipping: Calculated at checkout
This updated nut kit fits NV4500 transmissions in GM and Dodge gas applications. This is the style with 2 set screws and 2 brass pins to go under them. If your GM transmission has a balancer on it you will not be able to use the set screws.
| Weight | .50 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Reviews
There are no reviews yet.
| Make | Model | Year |
|---|---|---|
| GM/Chevy | 1500 | 1994 - 1995 |
| GM/Chevy | 1500 | 1996 - 1997 |
| GM/Chevy | 1500 | 1998 - 1999 |
| GM/Chevy | 1500 | 2000 - 2001 |
| GM/Chevy | 1500 | 2002 - 2003 |
| GM/Chevy | 1500 | 2004 - 2005 |
| GM/Chevy | 1500 | 2006 - 2007 |
| GM/Chevy | 2500 | 1994 - 1995 |
| GM/Chevy | 2500 | 1996 - 1997 |
| GM/Chevy | 2500 | 1998 - 1999 |
| GM/Chevy | 2500 | 2000 - 2001 |
| GM/Chevy | 2500 | 2002 - 2003 |
| GM/Chevy | 2500 | 2004 - 2005 |
| GM/Chevy | 2500 | 2006 - 2007 |
| GM/Chevy | 3500 | 1994 - 1995 |
| GM/Chevy | 3500 | 1996 - 1997 |
| GM/Chevy | 3500 | 1998 - 1999 |
| GM/Chevy | 3500 | 2000 - 2001 |
| GM/Chevy | 3500 | 2002 - 2003 |
| GM/Chevy | 3500 | 2004 - 2005 |
| GM/Chevy | 3500 | 2006 - 2007 |
Related products
Transmission Parts
This input shaft fits all ZF Ford 6 speeds with the 7.3 diesel engine.
View Details
Transmission Parts
Stock replacement front bearing retainer Dodge diesel and V10 NV4500 transmission
This is a stock replacement front bearing retainer for the NV4500 transmissions found in the Dodge diesel or V10 gas trucks. Fits all years with stock inputs.
View Details
This bearing and seal kit fits all Dodge NV4500 transmissions and GM NV4500 transmissions with the external slave cylinder up to 1995. This kit has all the seals, tapered bearings and races as well as the mainshaft pilot and thrust bearing and countershaft front plug. This kit does not include the caged needle bearings underneath [...]
View Details
Transmission Parts
Syncro Synchronizer Ring Kit ZF 6 Speed Ford 7.3 and 6.0 & GM ZF750 ZF650 Transmission
This syncro kit fits all ZF 6 speed transmissions in Ford and GM trucks. This kit has 11 rings.
View Details
Transmission Parts
Stock replacement input shaft Dodge diesel and V10 NV4500 transmission
This input shaft fits all Dodge diesel or V10 NV4500 5 speed transmissions. It is 1 1/4″ spline diameter and 22 teeth. This replaces part number 18160 and Dodge part number 4882358.
View Details
Transmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View Details
Transmission Parts
This mainshaft fits all NV5600 2wd Dodge diesel 6 speed transmission. The box has a Dodge part number 05010049AA for reference. This is an aftermarket part. We have been using the same supplier on these for over 5 years without an issue.
View Details
Transmission Parts
Cast Iron Tailhousing Transfer Case Adapter Dodge diesel NV4500 5 Speed Transmission
This is a cast iron tailhousing that fits a NV4500 5 speed transmission in the Dodge diesel trucks. This is much heavier that the factory aluminum piece and is a direct bolt on replacement. These have the 2 threaded holes on the side for the transfer case shifter, so they will fit all years.
View Details
Be the first to review “Updated 5th Gear Nut Kit NV4500 GM/Chevy 4X4 5 Speed Transmission”
You must be logged in to post a review.