417-862-4455
1350 Series Universal Joint 4 Bolt Flange Yoke Ford F250 F350 Super Duty Driveshaft Drive Shaft
$54.50
- SKU: 3-2-1859
- Brand: Dana/Spicer
- Weight: 3.0
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer 4 bolt flange yoke for the 1350 series driveline found in some Ford F250 and F350 trucks. It measures 3 3/8″ center to center on the mounting bolt holes. It has a casting number C3-2-831 and has a 2 15/16″ female pilot to center up on the mating flange.
| Weight | 3.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
General Inquiries
There are no inquiries yet.
Related products
Miscellaneous
GM 14 Bolt 10.5/11.5 Rear End Pinion Yoke Differential Full Float 1410 1415 Series U-Joint
This is an aftermarket Powertrain Industries pinion yoke for a 14 bolt with the 10.5″ or 11.5″ ring gear in a GM truck. This is the late style yoke with the sleeve on the seal surface. Can be used on all year trucks from 1973-current as long as you use the late pinion seal (26064030) [...]
View Details
Miscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View Details
This is a genuine AAM driveshaft flange yoke that shows to fit 2003+ Dodge Ram trucks with the 1485 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please be aware that the 40055983A casting number is the same on both the 1415 and 1485 series yokes.
View Details
This is a genuine Dana/Spicer u-joint bolt and strap kit for the GM cars and trucks with the 3R or 1344 Saginaw series pinion yoke. The Saginaw uses inside snap rings to keep the u-joint centered in the yoke. Kit includes 2 straps and 4 bolts.
View Details
This is a genuine Dana pinion yoke flange for a Dana 80 in a Ford truck. The Ford part number was BC3Z4851B. If you aren’t sure of your part number feel free to contact us with your differential tag number and we can check for you.
View Details
Small Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View Details
This is a genuine AAM pinion yoke with the balancer for the GM 3/4 and 1 ton trucks with the 11.5 rear differential 1999 and newer. This is for the 1480 or 1485 series u-joint. Can also be used on the 14 bolt 10.5 rear differentials.
View Details
This is a genuine AAM driveshaft slip yoke for a 1555 series driveline in a 2006 and newer Dodge Ram 2500 or 3500 series truck. It measures 9.52756″ long (from center of u-joint) 2.29961″ O.D. (where it slips into the transfer case) and 1.74803″ 34 spline. This yoke has been discontinued from AAM and 40098344 [...]
View Details