This is a genuine Dana/Spicer rear hub seal that fits many 1999-2012 Ford F350, F450, and F550 trucks. This does not fit all of these trucks. This goes with the 387AS/382A inner hub bearing. This is the same as National 710454. There was also another seal (2001888) that fit some of these trucks, with a 39250/39412 inner bearing. This also replaces Dodge part number 68036471AB.
1999-2012 Ford F350 F450 F550 Super Duty Rear Wheel Hub Seal Dana 80
$15.50
- SKU: 47860
- Brand: Dana/Spicer
- Weight: .50
- Shipping: Calculated at checkout
5 in stock
| Weight | .50 lbs |
|---|---|
| Dimensions | 4 × 4 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is a genuine rear wheel hub seal for 2011 and newer GM 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single or dual rear wheels. This part number is actually on the seal itself.
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsSmall Parts & Seals
2003+ Dodge Ram 3500 Dual Dually Rear Wheel Hub Seal 11.5 AAM
This is a genuine rear wheel hub seal for 2003 and newer Dodge 1 ton trucks with either the 11.5 rear axle and dual rear wheels. This part number is actually on the seal itself. The National seal part number is 710563.
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsSmall Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View DetailsSmall Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View Details
417-862-4455



