This is a genuine Tremec synchro key that fits 2001-2004 Ford Mustang’s with the TR3650 5 speed transmission. These are the same for all the synchros. There are 3 used for each syncrhro.
2001-2004 Ford Mustang Tremec TR3650 5 Speed Transmission Synchronizer Key Synchro
$2.00
- SKU: TCNS1438
- Brand: Tremec
- Weight: .10
- Shipping: Calculated at checkout
Weight | .10 lbs |
---|---|
Dimensions | 2 × 2 × 2 in |
Related products
Small Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View DetailsSmall Parts & Seals
2003+ Dodge Ram 2500/3500 Single Rear Wheel Hub Seal 10.5/11.5 AAM
This is a genuine rear wheel hub seal for 2003 and newer Dodge 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single rear wheels. This part number is actually on the seal itself. The new AAM part number for this seal is 40156029, but we still use the original [...]
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and 2003 and newer Dodge trucks with either the 10.5 or 11.5 rear end. This is for the yoke with the factory wear sleeve on it
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 7.6 or 8.0 rear end. This is for the yoke with the factory wear sleeve on it.
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View DetailsSmall Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View Details