This is a genuine Tremec synchro spring that fits 2001-2004 Ford Mustang’s with the TR3650 5 speed transmission. These are the same for all the synchros. There are 3 used for each syncrhro.
2001-2004 Ford Mustang Tremec TR3650 5 Speed Transmission Synchronizer Spring Synchro
$0.50
- SKU: TCRE0664
- Brand: Tremec
- Weight: .10
- Shipping: Calculated at checkout
Weight | .10 lbs |
---|---|
Dimensions | 1 × 1 × 1 in |
Related products
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsSmall Parts & Seals
This genuine Dana pinion nut washer that fits all Dana 80 rear ends. This goes with the 37082 nut.
View DetailsSmall Parts & Seals
These axle tube seals fit 2003+ Dodge Ram 2500/3500 series 4X4 front ends with the 9.25 front axle. This is an AAM part. These are sold individually.
View DetailsSmall Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View DetailsSmall Parts & Seals
GM 9.5 Rear Pinion Yoke Seal 1998+ AAM 3/4 ton Truck Dodge 4X4 Front 2500 3500 9.25 Front 2003+
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 9.5 rear end. This is for the yoke with the factory wear sleeve on it. This also fits Dodge 3/4 and 1 ton 4X4 trucks 2003 and newer with the AAM 9.25 front axle. These [...]
View DetailsSmall Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket.
View Details