417-862-4455
Dana 80 Pinion Bearing Preload Shim Kit GM Ford Dodge
$12.50
- SKU: 1132
- Brand: Motive Gear
- Weight: .25
- Shipping: Calculated at checkout
2 in stock
This is an aftermarket pinion bearing preload shim kit for the Dana 80 rear differential found in many GM, Ford, and Dodge trucks. This fits all Dana 80’s.
| Weight | .25 lbs |
|---|---|
| Dimensions | 1 × 1 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View Details
Small Parts & Seals
GM 7.6 and 8.0 Rear Pinion Yoke Seal 1998+ AAM 7.25 S10 Camaro
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 7.6 or 8.0 rear end. This is for the yoke with the factory wear sleeve on it. This also fits the later 7.25IFS with the wear sleeve on the yoke.
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
This is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View Details
Small Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View Details
Small Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View Details
Small Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View Details
This is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View Details