This is a genuine Dana/Spicer wiring harness for the electronic locker in the front of a 2007-2018 Jeep Wrangler Rubicon with a factory e-locker.
Dana Spicer 10021771 E-Locker Wiring and Switch Harness for 2007-2018 Jeep Wrangler JK with Ultimate Dana 44 Front Axle
$75.00
- SKU: 10021771
- Brand: Dana/Spicer
- Weight: 2
- Shipping: Calculated at checkout
Weight | 2 lbs |
---|---|
Dimensions | 12 × 12 × 3 in |
Related products
Small Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View DetailsSmall Parts & Seals
These axle tube seals fit 2003+ Dodge Ram 2500/3500 series 4X4 front ends with the 9.25 front axle. This is an AAM part. These are sold individually. The newest AAM part number for this seal is 40201742.
View DetailsSmall Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View Details