This ship kit fits GM applications with the 9.25IFS front or 9.5 rear differential and Dodge 9.25 4X4 front applications. This is an assortment of shims and should make any combination necessary for an install job.
Dodge 9.25 GM 9.25IFS 9.5 Front or Rear Pinion Shim Kit 4X4
$12.95
- SKU: 1102
- Brand: Motive Gear
- Weight: .25
- Shipping: Calculated at checkout
| Weight | .25 lbs |
|---|---|
| Dimensions | 4 × 4 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View DetailsSmall Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View DetailsSmall Parts & Seals
These axle tube seals fit 2003+ Dodge Ram 2500/3500 series 4X4 front ends with the 9.25 front axle. This is an AAM part. These are sold individually. The newest AAM part number for this seal is 40201742.
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsSmall Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View Details
417-862-4455

