417-862-4455
Dana 35 Pinion Seal Jeep Wrangler Rear 1987-2000 Ford Explorer Front
$4.81
- SKU: 43085
- Brand: Dana/Spicer
- Weight: .40
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer pinion seal for the Dana 35 rear axle found in 1987-2000 Jeep’s. These were also used in Ford Explorer front axles.
| Weight | .40 lbs |
|---|---|
| Dimensions | 6 × 6 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View Details
Small Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Small Parts & Seals
2003+ Dodge Ram 2500/3500 Single Rear Wheel Hub Seal 10.5/11.5 AAM
This is a genuine rear wheel hub seal for 2003 and newer Dodge 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single rear wheels. This part number is actually on the seal itself. The new AAM part number for this seal is 40156029, but we still use the original [...]
View Details
This is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View Details
Small Parts & Seals
This is a genuine rear wheel hub seal for 2011 and newer GM 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single or dual rear wheels. This part number is actually on the seal itself.
View Details
Small Parts & Seals
Ford Dana 50 & 60 Front Axle Tube Seals 1998.5 Up 4X4 Straight F250 F350 Super Duty
These Ford axle tube seals show to fit 1998.5 and up F250 & F350 with either the Dana 50 or Dana 60 straight front axle. These are the style seal that spin inside themselves. The new part number for these seals is 2019816.
View Details
Small Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View Details