417-862-4455
New Venture NV4500 1-2 Synchronizer Key & Spring Kit GM Chevy Dodge 4500 Transmission
$12.50
- SKU: NV4500-K1
- Brand: New Venture
- Weight: .25
- Shipping: Calculated at checkout
3 in stock
This is an aftermarket set of 4 keys and 4 springs for the 1-2 synchronizer in a NV4500 transmission. 1 kit is enough for 1 synchronizer. These were used in GM and Dodge applications from 1994-2005.
| Weight | .25 lbs |
|---|---|
| Dimensions | 2 × 2 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View Details
Small Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View Details
Small Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View Details
Small Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Small Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View Details
Small Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View Details
Small Parts & Seals
GM 10.5/11.5 Rear Pinion Yoke Seal 1998+ AAM Dodge 2003-2013
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and 2003-2013 Dodge trucks with either the 10.5 or 11.5 rear end. This is for the yoke with the factory wear sleeve on it
View Details