This is an aftermarket 32 spline input shaft for a New Process 205 transfer case in a GM truck. These were used from 1981-1992, and were used behind TH400 automatic or 465 Muncie 4 speed transmissions.
NP205 GM Chevy Transfer Case Input Shaft 32 Spline TH400 65 Muncie 1981-1992 New Process 205
$175.00
- SKU: 13929
- Brand: New Process
- Weight: 9
- Shipping: Calculated at checkout
1 in stock
Weight | 9 lbs |
---|---|
Dimensions | 12 × 6 × 6 in |
Related products
Transfer Case Parts
27 spline female coupler used between GM 205 transfer case and TH350 or 700R4 automatic
27 spline female coupler used between GM automatic transmissions and New Process 205 gear driven transfer case. Typically used with turbo 350 or 700R4.
View DetailsTransfer Case Parts
This sprocket fits both 261XHD and 263XHD GM transfer cases. These are used with the HV074 chain. 2 are required per unit.
View DetailsTransfer Case Parts
This range fork fits all 271 Dodge transfer cases. The casting number is the same as the part number.
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsTransfer Case Parts
This range slider fits all versions of the 231 241 and 261 transfer cases, except 241DHD with the PTO opening on the side of the transfer case. Including GM, Dodge, and Jeep.
View DetailsTransfer Case Parts
This is the hub that splines into the sprocket and synchronizer clutch and rides on the mainshaft of the transfer case on a 261 or 263 GM. This one is made to use the seperate synchronizer clutch. Be sure that yours is made like this as some were a 1 piece design with the synchronizer [...]
View DetailsTransfer Case Parts
261 & 263 GM & HD Transfer Case Mainshaft Chevy 1999-2007 1500 2500 6.0
This mainshaft fits all GM 261 and 263 transfer cases except the XHD versions found behind the Allison automatic transmissions or ZF 6 speed manual transmissions in the 3/4 and 1 ton trucks. It comes with an updated snap ring for the synchronizer hub.
View DetailsTransfer Case Parts
This range fork fits all versions of the 263 GM transfer case including 263XHD. This is the updated fork for use with the 43681 range slider with the wider groove for the shift fork. If your transfer case is 2002 or older you may have to update the slider as well. This fork does not [...]
View Details