417-862-4455
This is a genuine Dana/Spicer wheel/hub bearing kit. This kit includes 1 each of a bearing number 387AS and a race number 382A. This was a common bearing and race combination for many GM applications.
View Details
Traction Devices
This is a genuine Dana/Spicer loaded Trac-Lok differential for the Dana 35 rear differential found in some 2001-2006 Jeep Wrangler’s. This was also used in 2002-2003 Jeep Liberty’s. This is for use with 3:54 or numerically higher gear ratio’s (3:73, 4:10. etc.). This kit includes the 2 differential side bearings and a set of ring [...]
View Details
Cases & Spiders
Differential E-Locker Dana 44 JK Rubicon Jeep 4X4 Front Axle 2007-2016 Electric Complete Loaded Kit
This is a genuine Dana/Spicer electric locking differential that fits Dana 44 4X4 front axles in the Jeep JK Rubicon from 2007-2016. This kit includes the 2 differential side bearings and races, and a set of ring gear bolts. This has 30 spline axle gears and is for ratios 3:92 and up numerically.
View Details
This is a genuine Dana/Spicer internal kit for the Dana 44 rear differential in 2007-2017 Jeep JK’s. These are for non-Rubicon JK’s. These have 30 axle splines and are for an “open” differential. These do not fit a posi trac or limited slip differential.
View Details
Bearing Kits
This is a genuine Dana bearing and seal kit for the S110 S111 S130 S132 drop out 3rd member style rear ends found in some For F450’s and F550’s, as well as some of the Dodge Ram 4500 and 5500 series trucks. It includes bothe pinion bearings and races, both differential side bearings and races [...]
View Details
This is a genuine Dana bearing and seal kit for the S135 or S150 drop out 3rd member style rear ends found in some For F450’s and F550’s. It includes both pinion bearings and races, both differential side bearings and races and a pinion seal. The seal number is 029HH100. The inner pinion bearing is [...]
View Details
DUST SHIELD for front BRAKE ROTOR with Dana 60 Front Axle PLEASE NOTE THERE IS ALSO A PART NUMBER 47758 THAT HAS THE SAME BOLT PATTERN, BUT IS ONLY 13 1/4″ DIAMETER. FORD F350 4×4 with DUAL rear wheels 2000-1/2 F450, F550 4×4 with DUAL rear wheels 2000, 2001, 2002, 2004 DOES NOT FIT 2005 and [...]
View Details
This is a genuine Dana/Spicer 32 spline slip yoke. This fits a 231 or 241 Dodge transfer case in a 1/2 ton pickup from 1994-2001. May fit other years as well. This is for a 1330 series universal joint. The casting number on this yoke is C2-3-2899-1 Spicer.
View Details
Traction Devices
Dodge 8.25 Trac-Lok Differential Posi Carrier Assembly Complete 27 Spline C8.25 1976-1996
This is a genuine Dana Trac-Loc differential for Dodge vehicles with the 8.25″ ring gear from 1976-1996 with 27 spline axles. This is what came out in these year vehicles from the factory if they had a posi track differential. They also make a nice upgrade when replacing an open differential. The old Dana number [...]
View Details
Traction Devices
Dodge 8.25 Trac-Lok Differential Posi Carrier Assembly Complete Jeep 29 Spline C8.25 1997+
This is a genuine Dana Trac-Loc differential for Dodge and Jeep vehicles with the 8.25″ ring gear from 1997+ with 29 spline axles. This is what came out in these year vehicles from the factory if they had a posi track differential. They also make a nice upgrade when replacing an open differential. The new [...]
View Details
This is a genuine Dana Trac-Loc differential for Dodge vehicles with the 9.25″ ring gear from 1970-2009 with 31 spline axles. This is what came out in these year vehicles from the factory if they had a posi track differential. They also make a nice upgrade when replacing an open differential. The new Dana number [...]
View Details
Small Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View Details
Small Parts & Seals
Dodge Dana 44 & 60 Front Outer Stub Axle Castle Nut Also AAM 9.25 Spindle 4X4
This genuine Dana axle nut fits all Dodge front axles including Dana 44 & 60 and the AAM 9.25 found in 2003+ trucks. This is a castle nut. We also have the washer available. This is the same part as AAM 40010627.
View Details
Axles & Axle Bearings
This genuine Dana front outer stub axle fits Dodge 1/2 ton trucks from 1994-2001 with the Dana 44 front axle. this axle is 6.77 long from the center of the u-joint to the tip of the splines and is 1.41 33 spline. If you are not sure of this part number you can call or [...]
View Details
Axles & Axle Bearings
Dodge Dana 60 Disconnect Middle Intermediate Axle 2000, 2001, 2002
This is a genuine Dana intermediate axle for a Dana 60 with a disconnect axle in a Dodge 3/4 or 1 ton truck from 2000-2002. This axle is set up for a larger slide collar than the earlier models. This axle runs from the slide collar out to the u-joint.
View Details
Axles & Axle Bearings
This is a genuine Dana right hand inner axle for the disconnect side of a Dodge 3/4 or 1 ton truck. This is the one that runs from the differential to the discconnect on the passenger side front axle. this fits trucks from 1994-1999. If you are unsure of the part number you can call [...]
View Details