This is a genuine Dana/Spicer loaded open differential for the Super 60 4X4 front axle found in some 1999 and newer Ford F250 and F350 trucks. This is the same as Ford part number 5C3Z4026B. This kit includes the loaded differential, a pair of side bearings, a set of ring gear bolts, and shims. This [...]
View DetailsMiscellaneous
Ford F250 F350 Super Duty 1999 – 2006 Axle Thrust Washer GENUINE DANA 4X4 Front Plastic
This is a NEW DANA Thrust Washer FOR F250 THRU F550 1999 – 2006. This is the INNER thrust for the outer spindle yoke. Used with the 2002692 stub axle.
View DetailsAxles & Axle Bearings
Ford F350 Dana 60 4X4 Front Outer Stub Axle 30 Spline 1978-1997
This is a genuine Dana/Spicer outer stub axle for 1979-1997 Ford F350 trucks with the Dana 60 front differential. This axle is 30 spline and 11.41″ long, to the center of the universal joint. These axles use the 1480 series universal joint.
View DetailsSmall Parts & Seals
This is a genuine Dana/Spicer o-ring for the rear axle flange on some Ford F350 trucks. These are for the 35 spline axles. These also work on the 10.25 or 10.5 rear axles. This is the o-ring that seals the axle to the hub.
View DetailsAxles & Axle Bearings
Ford F350 Rear Axle Flange O-Ring Dana 80 Hub 37 Spline F450
This is a genuine Dana/Spicer o-ring for the rear axle flange on some Ford F350 and F350 trucks. These are for the 37 spline axles. These also work on S110 and S130 axles. This is the o-ring that seals the axle to the hub. Axle Model DANA 80 Inner Diameter 4.14 Width 0.139 Package Type [...]
View DetailsThis is a genuine Dana/Spicer 4 bolt u-joint flange yoke that fits Ford F350 trucks with a Dana 80 rear differential with the round flange on the pinion and a 1410 series universal joint.. The casting number on the yoke is C3-2-771 SPR.
View DetailsThis is a genuine Dana/Spicer u-joint yoke flange that fits many common domestic applications including Ford’s and Jeep’s. This is for a 1310 series universal joint. Here are some specs from the Dana website: Brand Spicer Series 1310 Flange Or Swing Dia. In. (A) 4.500 Bolt Circle Dia. In. (B) 3.500 Bolt Hole Dia. In [...]
View DetailsThis is a genuine Dana/Spicer crush sleeve for the M300 rear differential found in late model Ford F350 and F450 series trucks.
View DetailsRing & Pinion Sets
Ford M300 Ring & Pinion Gear Set 3:73 Gearset 373 F350 Super Duty
This is a genuine Dana/Spicer gear set, in a 3:73 ratio for the M300 rear differential found in late model Ford F350 series trucks. The pinion number is 10018690 and the ring gear is 10018689. Please note that Dana does not offer a 41 spline differential for this ratio, so it can’t be used in [...]
View DetailsRing & Pinion Sets
This is a genuine Dana/Spicer gear set, in a 4:10 ratio for the M300 rear differential found in late model Ford F350 and F450 series trucks. The pinion number is 2010904 and the ring gear is 2010903. This replaces Ford part numbers LC3Z4209G or HC3Z4209K.
View DetailsRing & Pinion Sets
This is a genuine Dana/Spicer gear set, in a 4:30 ratio for the M300 rear differential found in late model Ford F350 and F450 series trucks. The pinion number is 10031773 and the ring gear is 10031772.
View DetailsFront Spindle INNER NUT with PIN Fits FORD Bronco ll , Ranger with Manual Hubs and Dana 28 IFS Front axle 1983, 1984, 1985, 1986, 1987, 1988, 1989 1.437 ID 2.180 OD .312 THICK Use with 40075 WASHER and 40080 OUTER NUT
View DetailsSmall Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View Details