This is an aftermarket shifter bushing for the ZF manual transmissions found in many Ford F250 and F350 series trucks from 1987-2010. Each transmission has 2 of these, 1 on either side of the shift stub.
Ford F250 F350 Super Duty ZF 5 or 6 Speed Manual Transmission Shifter Bushing ZFS6-650 S542 S547
$6.00
- SKU: 1307306154
- Brand: Transtar
- Weight: .10
- Shipping: Calculated at checkout
4 in stock
| Weight | .10 lbs |
|---|---|
| Dimensions | 1 × 1 × 1 in |
General Inquiries
There are no inquiries yet.
Related products
This front bearing retainer fits NV4500 Dodge diesel with the aftermarket big 1 3/8″ input shafts. Still uses stock throwout bearing.
View DetailsTransmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View DetailsTransmission Parts
This input shaft fits all ZF Ford 6 speeds with the 7.3 diesel engine.
View DetailsTransmission Parts
NV4500 cluster assembly early up to 1996 Dodge and GM 5:61 ratio
This cluster fits 1992-1996 Dodge and most GM NV4500 transmissions with the 22 tooth input shaft and 5:61 ratio.
View DetailsTransmission Parts
1 3/8″ input shaft Dodge diesel and V10 NV4500 transmission 5 speed
This input shaft fits the NV4500 Dodge transmissions used behind the diesel or V10 gas engines. This is the larger 1 3/8″ clutch spline found on some aftermarket or factory 6 speed clutches.
View DetailsTransmission Parts
Stock replacement front bearing retainer Dodge diesel and V10 NV4500 transmission
This is a stock replacement front bearing retainer for the NV4500 transmissions found in the Dodge diesel or V10 gas trucks. Fits all years with stock inputs.
View DetailsTransmission Parts
Inner Synchronizer ring NV5600 Dodge diesel 6 speed transmission updated
This synchronizer ring fits all the later (2002 & up) NV5600 transmission found in the Dodge diesel trucks. 22760 is our part number, but some suppliers use a part number 44548. There are 7 of these in 1 transmission and they are all the same.
View DetailsTransmission Parts
Input shaft T56 Camaro/Firebird LS1 6 speed Tremec transmission
This input shaft fits all T56 Camaro and Firebird applications with the LS1 engine from 1998-2002. It has 31 teeth and is 10.62 inches long. This is an aftermarket shaft from Pro-Active gear. We have used a lot of their parts and have had really good results.
View Details
417-862-4455





