This is a Yukon front axle seal that shows to fit 2002-2010 Dodge Dakota, Durango, and Ram 1500 4X4 trucks with the 8.0ifs front axle. This does not fit 2010 and newer right side with the 4 bolt seal.
2002-2010 Dodge Ram 1500 4X4 Front Axle Seal 8.0IFS Durango Dakota
$12.50
- SKU: YMSC1014
- Brand: Yukon
- Weight: .20
- Shipping: Calculated at checkout
Weight | .20 lbs |
---|---|
Dimensions | 6 × 6 × 1 in |
Related products
Small Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 7.6 or 8.0 rear end. This is for the yoke with the factory wear sleeve on it.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
Ford Dana 50 & 60 Front Axle Tube Seals 1998.5 Up 4X4 Straight F250 F350 Super Duty
These Ford axle tube seals show to fit 1998.5 and up F250 & F350 with either the Dana 50 or Dana 60 straight front axle. These are the style seal that spin inside themselves. The new part number for these seals is 2019816.
View DetailsSmall Parts & Seals
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket.
View DetailsSmall Parts & Seals
GM 9.5 Rear Pinion Yoke Seal 1998+ AAM 3/4 ton Truck Dodge 4X4 Front 2500 3500 9.25 Front 2003+
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 9.5 rear end. This is for the yoke with the factory wear sleeve on it. This also fits Dodge 3/4 and 1 ton 4X4 trucks 2003 and newer with the AAM 9.25 front axle. These [...]
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View Details