417-862-4455No products in the cart.
$85.00
This is a genuine Dana/Spicer yoke in a 1350 series universal joint. This fits all domestic versions of the 203 or 205 New Process transfer cases with a bolt on 32 spline output shaft. This yoke uses bolts and straps to hold the u-joint in place.
View Details
$69.95
This is a brand new genuine Dana 1410 series yoke for the 203 or 205 New Process transfer case with a 32 spline output shaft. This yoke uses bolts and straps to hold the u-joint. Please be sure that you need one for the 32 spline as some of these units were 30 Spline.
View Details
$105.00
This is a brand new genuine Dana 1310 series yoke for the 205 New Process transfer case found in early GM trucks with a 10 spline front output shaft. This yoke uses bolts to attach the front driveline. Please be sure that you need one for the 10 spline as some of these units were [...]
View Details
$105.00
This is a genuine Dana/Spicer 32 spline yoke for a 1310 series universal joint that fits some 205 New Process transfer cases. Please note that most GM trucks had a 30 spline shaft. This yoke is 1.375″ 32 spline and 2.125 seal diameter. This yoke uses bolts and straps to attach the universal joint.
View Details
$65.00
This is a genuine AAM 32 spline slip yoke in a 1350 series u-joint that fits most GM transfer cases with a 32 spline rear out put shaft. This includes 241, 243, 261 LD & HD, and 263 HD. The 1350 u-joint has 1 3/16 caps and outside snap rings. These transfer cases were used [...]
View Details
$69.00
This is a genuine AAM serrated pinion flange for the 10.5 13 bolt front axle found in 2019+ Ram 4500 and 3500 series trucks.
View Details
$65.00
3-4-1841-1 JOINT SERIES:1410 D DIMENSION:1.19 E DIMENSION:4.44 SR or 4.19 BS/UB YOKE STYLE:Bearing Strap Q LENGTH THRU HOLE:2.188 R HUB DIAMETER:2.375 S CENTERLINE TO END:4.188 SPLINE COUNT:10 SPLINE OD:1.75
View Details
$165.00
Genuine Spicer 3-4-5191-1 End Yoke with Splined Bore. 1480 Series. Fits ProFab 35 spline HP NP205 output shafts. This yoke is set up for bolts and straps (threaded holes), but can be modified to accept u-bolts. Brand Spicer Series 1410 Spline Count 35 Yoke Style BS Hub Diameter R 2.125 C/L To End Hub S [...]
View Details
$160.00
Genuine Spicer 3-4-6691-1 End Yoke with Splined Bore. 1480 Series. Fits ProFab 35 spline HP NP205 output shafts. This yoke is set up for bolts and straps (threaded holes), but can be modified to accept u-bolts. Brand Spicer Series 1480 Spline Count 35 Yoke Style BS Hub Diameter R 2.125 C/L To End Hub S [...]
View Details
$69.00
This is a genuine Dana rear axle pinion yoke flange that shows to fit Nissan trucks as follows: 2003-2012 Titan, 2003-2008 Armada, 2005-2012 Frontier, and 2003-2007 Pathfinder with the Dana 44 rear axle. This yoke is 21 spline with 3 double spline making it a 24 spline.
View Details
$49.95
This ia a genuine Dana Spicer round pinion flange yoke that fits various Ford Dana 60 and 70 applications. If you are unsure of the part number that you need feel free to email us with a differential tag number and we can check for you. 2010948 COMPANION FLANGE CHECK AVAILABILITY ADD TO LIST Specifications [...]
View Details
$45.00
This is a genuine AAM pinion yoke for the 8.5 10 bolt rear differential found in many GM cars and trucks from 1973-1998. This is for the Saginaw u-joint that uses inside snap rings to keep the u-joint centered in the yoke. These were also us in 4wd front 8.25IFS and 9.25IFS from 1988-2010. The [...]
View Details
$70.00
This is a genuine AAM slip yoke that fits all GM 32 spline transfer cases, including 241 246 261 263 in 1/2 and 3/4 ton trucks with gas engines. This can be used to replace Dana/Spicer part number 3-3-01646X that has a casting number C3-3-919-1. The Powertrain Industries part number is 4103-322.
View Details
$85.00
This is a genuine AAM driveshaft flange yoke that shows to fit 2003+ Dodge Ram trucks with the 1485 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please be aware that the 40055983A casting number is the same on both the 1415 and 1485 series yokes.
View Details
$95.00
This is a genuine AAM driveshaft flange yoke that shows to fit 2006+ Dodge Ram 2500 and 3500 series trucks with the 1415 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please note that the 40055983A casting number is the same on the 1485 series yoke as well.
View Details